exam27Govt exam practice that learns from you

SSC CGL · Maths

"Time, speed, distance and work: units, relative speed and efficiency"

"Solve motion, trains, average speed, combined work and efficiency questions using reliable exam shortcuts."

5 min readUpdated: 19 Oct 2026Read this note in Hindi

What you will learn

  • Use speed = distance/time with consistent units.
  • Solve relative-speed, train and equal-distance average-speed problems.
  • Represent a job as one whole and add work rates.
  • Convert worker efficiency into time without mixing up direct and inverse relationships.

Time, speed and distance

Speed tells us how much distance is covered in one unit of time. The three basic equations are distance = speed × time, speed = distance/time and time = distance/speed. All three require consistent units. A speed in km/h combined with a time in minutes must be converted first. Since one kilometre is 1,000 metres and one hour is 3,600 seconds, multiply km/h by 5/18 to obtain m/s; multiply m/s by 18/5 to obtain km/h.

Average speed is total distance divided by total elapsed time, including any halt mentioned in the question. It is not normally the average of two listed speeds. For equal distances travelled at speeds a and b, the correct average is 2ab/(a + b). For equal times, the arithmetic mean (a + b)/2 does work. Identify the condition before choosing a formula.

Relative speed and trains

When two objects move towards each other, their closing speed is the sum of their speeds. When they travel in the same direction, the relative speed is the difference between the faster and slower speeds. A train completely crossing a pole travels its own length. A train crossing a platform travels the sum of the train length and platform length. Convert the train's speed into m/s when lengths are given in metres.

Relative motion

Opposite directions

Add speeds to find how fast the gap closes. For 40 km/h and 50 km/h, relative speed is 90 km/h.

Same direction

Subtract the slower speed from the faster. For 50 km/h and 40 km/h, relative speed is 10 km/h.

Efficiency and work are inverse in time

For a fixed job, a worker who is twice as efficient finishes in half the time. If A takes 10 days and B takes 15 days, their efficiencies are in the ratio 1/10 : 1/15 = 3:2. A worker-day calculation assumes equal daily efficiency unless the problem says otherwise. If workers join or leave, calculate the work completed in each phase, subtract it from one whole job, and solve for the remaining days.

Two workers need 10 and 15 days separately

Short trick

Combined time = (10 × 15)/(10 + 15) = 6 days.

Full method

Together they complete 1/10 + 1/15 = 1/6 of the job daily. Time for one job = 6 days.

Train crosses a platform

A 180 m long train running at 54 km/h crosses a 120 m platform. How much time does the crossing take?

  1. Crossing distance = train length + platform length = 180 + 120 = 300 m.

  2. Convert speed: 54 × 5/18 = 15 m/s.

  3. Time = 300/15 = 20 seconds.

Answer

The train takes 20 seconds to clear the platform.

Worker joins later

A finishes a job in 12 days and B in 18 days. A works alone for 4 days, then B joins. How long does the entire job take?

  1. A completes 4/12 = 1/3 of the job in four days; 2/3 remains.

  2. Together their rate is 1/12 + 1/18 = 5/36 job/day.

  3. Remaining time = (2/3)/(5/36) = 24/5 = 4.8 days.

Answer

Total time is 8.8 days, or 8⅘ days, from the start.

Quick checking strategy

In crossing questions, sketch the objects mentally: a pole contributes no length, but a platform does. In work questions, calculate the amount of job remaining after each change of workers. Your final combined time should be less than either solo time when both workers add positive, independent effort continuously. For motion, the closing speed of objects travelling towards each other must exceed either individual speed.

Flashcards

Speed conversion

A vehicle moves at 72 km/h. What is its speed in m/s?

Show the explanation

72 × 5/18 = 20 m/s.

Combined work

A does a job in 8 days and B in 24 days. Together they finish it in how many days?

Show the explanation

Daily combined rate = 1/8 + 1/24 = 4/24 = 1/6 of the job.

Common doubts

Does a stop count in average speed?

Yes, if the question asks for average speed over the whole journey, divide total distance by total elapsed time including the stop.

Why add lengths for a platform crossing?

The rear of the train must pass the far end, so the train's front travels both lengths.

Can two workers always finish faster together?

In standard independent-efficiency problems, yes. Real-world interference is ignored unless the question specifies it.

Put it into practice

Read a topic? Test it now.

Free mock tests in the real exam pattern, with a solution for every question.

Practise SSC CGL mock tests

Written and reviewed by the exam27 team. Check the official notice for exam dates and rules.